Ir al contenido

AMORTIGUADOR 2.0 (PIEZA) DIRECCION ATS FOX LIFT: NA JEEP WRANGLER JL 2018-2024 RESERVORIO: SI AJUSTE: SI FX06-983-02-148

With conventional steering stabilizers, turning in one direction creates an increase in pressure inside the stabilizer as the shaft occupies more volume in the body and displaces the oil. The repercussion is a push or pull steering force felt by the driver as the stabilizer attempts to return to its neutral state. To overcome this unidirectional force, dual opposing stabilizers are often used, but this requires additional mounting hardware and space.

The Factory Race Series 2.0 Stabilizer ATS utilizes an Adjustable Through Shaft (ATS) architecture that eliminates shaft fluid displacement throughout the stabilizer’s entire travel in both directions. The external piggyback reservoir provides additional fluid capacity and utilizes an Internal Floating Piston (IFP) to separate the fluid from the nitrogen gas charge to eliminate cavitation. For increased control that can be tailored to any driving style and setup, an external adjuster provides 24 clicks of adjustment to fine tune the feel. The result is highly customizable and consistent damping of unwanted steering feedback in a single, bolt-on stabilizer. 


PART NUMBER983-02-148
FEATURESAdjustable Through Shaft Stabilizer; Performance Tuned For Vehicle Specific Application; Aluminum Body Dissipates Heat Faster Than Steel; Eliminates fluid displacement, delivering neutral and consistent damping of unwanted steering feedback; External Reservoir With Compression Adjuster; Black Anodized CNC Machined Aluminum Components
SERIESFactory Race
TRAVEL8.12
BODY2.0” impact extruded and CNC machined 6061-T6 clear anodized aluminum body resists rust over time
BODY PLATINGHard-anodized for a durable finish
COMPONENTSBlack-anodized, CNC-machined 6061-T6 billet aluminum
SHAFT5/8" hard chrome plated heat-treated alloy steel
PISTONRace-developed high-flow piston design
VALVINGApplication specific valving to maximize performance
SEALSRedundant sealing pack system main seal, wiper seal, scraper seal
EXTENDED LENGTH23.19
COMPRESSED LENGTH15.07
TOP MOUNTAxle Mount
BOTTOM MOUNTEyelet
FITMENT NOTESAxle Mount
JL JEEP FOX
13,399.00 13,399.00 (IVA incluido)

With conventional steering stabilizers, turning in one direction creates an increase in pressure inside the stabilizer as the shaft occupies more volume in the body and displaces the oil. The repercussion is a push or pull steering force felt by the driver as the stabilizer attempts to return to its neutral state. To overcome this unidirectional force, dual opposing stabilizers are often used, but this requires additional mounting hardware and space.

The Factory Race Series 2.0 Stabilizer ATS utilizes an Adjustable Through Shaft (ATS) architecture that eliminates shaft fluid displacement throughout the stabilizer’s entire travel in both directions. The external piggyback reservoir provides additional fluid capacity and utilizes an Internal Floating Piston (IFP) to separate the fluid from the nitrogen gas charge to eliminate cavitation. For increased control that can be tailored to any driving style and setup, an external adjuster provides 24 clicks of adjustment to fine tune the feel. The result is highly customizable and consistent damping of unwanted steering feedback in a single, bolt-on stabilizer. 


PART NUMBER983-02-148
FEATURESAdjustable Through Shaft Stabilizer; Performance Tuned For Vehicle Specific Application; Aluminum Body Dissipates Heat Faster Than Steel; Eliminates fluid displacement, delivering neutral and consistent damping of unwanted steering feedback; External Reservoir With Compression Adjuster; Black Anodized CNC Machined Aluminum Components
SERIESFactory Race
TRAVEL8.12
BODY2.0” impact extruded and CNC machined 6061-T6 clear anodized aluminum body resists rust over time
BODY PLATINGHard-anodized for a durable finish
COMPONENTSBlack-anodized, CNC-machined 6061-T6 billet aluminum
SHAFT5/8" hard chrome plated heat-treated alloy steel
PISTONRace-developed high-flow piston design
VALVINGApplication specific valving to maximize performance
SEALSRedundant sealing pack system main seal, wiper seal, scraper seal
EXTENDED LENGTH23.19
COMPRESSED LENGTH15.07
TOP MOUNTAxle Mount
BOTTOM MOUNTEyelet
FITMENT NOTESAxle Mount